Easy Method For Firmware Upgradation..!!

*Download the latest Firmware for S5600 from the link given below. (S5600XEIG1)
The firmware given in the link is European Version, Which will allow direct installation of 3rd party java games and applications(which is not possible in Factory Version-India)
ht tp://firm ware.javer.sgh. ru/
*DOWNLOAD MULTILOADER FROM HERE (JUST 300 KB IN SIZE)
ht tp://ww w.4sha red. com/file/108661971/26431632/MultiLoader_V556.ht ml
STEP 2)
* Now you have to check if you have SIM LOCK enabled on your phone.Type *#7465625# and see. SIM LOCK SHOULD BE OFF. Do not proceed if you have it ON, get it to a shop & have it disabled.
*Now it is time to back up the datas (contacts, Messages, All files) of your phone.
(The easiest way to backup your phone would be to Copy all your contacts to sim card and all other datas to ur memory card)
*Now remove the sim card and memory card and put the battery back but DON’T switch ON your phone.
*Now press the 3 buttons together
VOLUME DOWN + CAMERA KEY + POWER KEY (ALL TOGETHER)
*Now your Phone shows a download screen, If yes then do not press any buttons of your phone.. just keep it Idle..
* Now connect phone to your PC via USB.
STEP 3)
* Extract the downloaded Firmware in a folder on your desktop.
*Now run Multiloader.
h t t p:/ /1 .bp.blogspot. c om/_m6YbKcEqcDU/SmdoCLovlAI/AAAAAAAAAeM/Ho4rmypqTzA/s1600-h/multiloader.png
(Follow the picture as shown in the above link along with the instructions given below)
*NOW TICK MARK ON THESE FOUR OPTIONS IN MULTILOADER
1. MSM6275
2. Boot Change
3. Full Download
4. Master Rom
*CLICK ON BOOT AND LOCATE THE BOOTFILES LOCATED IN UR FIRMWARE FOLDER ON DESKTOP
*CLICK ON AMSS AND LOCATE THIS FILE APPS_COMPRESSED.BIN LOCATED IN UR FIRMWARE FOLDER ON DESKTOP
*CLICK ON RSRC1 AND LOCATE THE .RC1 FILE LOCATED IN UR FIRMWARE FOLDER ON DESKTOP
*CLICK ON RSRC2 AND LOCATE THE .RC2 (LOW) FILE LOCATED IN UR FIRMWARE FOLDER ON DESKTOP
*CLICK ON FACTORY FS AND LOCATE THE .FSS FILE LOCATED IN UR FIRMWARE FOLDER ON DESKTOP

STEP 4)
CLICK ON PORT SEARCH(refer the multiloader image given in the above link) IT WILL SHOW READY AND DOWNLOAD BUTTON WILL ACTIVATE
CLICK ON DOWNLOAD BUTTON AND SIT BACK FIRMWARE WILL B INSTALLED IN UR PHONE NOW DO NOT PRESS ANY KEY ON UR PHN OR SWITCH OFF UR PC. 
STEP 5)

AFTER PROCESS COMPLETES JUST WAIT FOR 2 MIN AND REMOVE UR BATTERY AGAIN WAIT FOR 2 MIN AND PUT UR BATTERY BACK & SWITCH ON THE PHONE...........
DIAL *2767*3855# ON KEYPAD AND RESET UR PHONE
CHECK AND ENJOY UR NEW FIRMWARE (*#1234#)

NOTE : Now you can install games and applications directly into your phone by simply transferring the jar & Jad files in to MMC(which is not possible in any of the Indian factory verrsion)… Also This Firmware won’t give you the new menu that you can find in the latest Indian Firmware (S5603DDIG1).. Remaining all features will be same that of your (S5603DDIF1).

BOOT SCREEN MODDING

 i modded the boot screen of star 3G
here is the android boot screen for star 3g created by me
http://www.4shared.com/file/kPdmOEeM/Rsrc2_S5603__Low_.html
just upload the rc2 file alone using multi loader

BOOT SCREEN MODDING

Well this is to all who don't know what exactly boot screen modding is.. Just by doing this, when you switch off and switch on the phone, You can see the Android Picture while the phone starts.. Try it, Damn easy.. You don't need to back up your phone..

First download the Rsrc2 file from the link given above and Just follow the steps given below..!!

1) Open the Multiloader and connect your phone to PC via usb.

2)Select Control option as MSM 6275

3) You just need to select the downloaded rsrc2 file through Rsrc2 option in Multiloader...

4)Now Click on port search and click on download..

Once download is finished, the phone automatically boots up with the ANDROID screen.. enjoy..!!




Your phone will show the android screen when you switch on your phone..!!

Removing virtual kepad from Games and Apps

If you wanna remove virtual kepad from Games and Apps. Open the .jad file in notepad and append following entries and update the Java DB.

TOUCHSCREEN: true
NUMPAD: true
MIDlet-Touch-Support: true
SCREEN_WIDTH: 240
SCREEN_HEIGHT: 320

These entries will remove the virtual keypad.

Before i edited d jad file..the jad file was like this..

Manifest-Version: 1.0
Created-By: 1.4.1_02 (Sun Microsystems Inc.)
MicroEdition-Configuration: CLDC-1.1
MIDlet-Name: Roland Garros 2008
MIDlet-Icon: /icon.png
MIDlet-Vendor: Gameloft SA
MIDlet-1: Roland Garros 2008, /icon.png, GloftRGAR
MIDlet-Version: 1.4.7
MicroEdition-Profile: MIDP-2.0
MIDlet-Jar-Size: 576987
MIDlet-Jar-URL: RolandGarros2008.jar
Nokia-MIDlet-Category: Game

After d edition the jad file becomes

Manifest-Version: 1.0
Created-By: 1.4.1_02 (Sun Microsystems Inc.)
MicroEdition-Configuration: CLDC-1.1
MIDlet-Name: Roland Garros 2008
MIDlet-Icon: /icon.png
MIDlet-Vendor: Gameloft SA
MIDlet-1: Roland Garros 2008, /icon.png, GloftRGAR
MIDlet-Version: 1.4.7
MicroEdition-Profile: MIDP-2.0
MIDlet-Touch-Support: True
MIDlet-Jar-Size: 576987
MIDlet-Jar-URL: RolandGarros2008.jar
Nokia-MIDlet-Category: Game

activate GPS IN STAR 3G

1) press *#6984125*#
2) Go to INTERNALS.
3) put master key *#9072641*#
4) go to DEBUG SETTINGS.
5) go to CHIP.
6) turn MEGACHIPS ON (by default it's modem on).

Explanation Given By them!!!!!!!!

Actually it is Assisted GPS via modem which is on by default....Megachip is the GPS Chip which is not in use in default setting.

After it has been done go to REBOOT to reboot your phone...then on restart open Google Maps....exact location is shown now without blue circle if you are in OPEN AREAS.